Mains ready
stepper motor power amplifiers
WSE 04.230 AC V01 and
WSE 06.230 AC V01

Stepper motor power amplifiers
WSE 04.80.V01 and WSE 08.80.V01
in compact housing

Power amplifier boards
series SE...V31/V33 and SE P05...V2

Panel mountage
19-inch rack system ELK/ELR
Power supplies NT
Board holder KH-SE_01
    home     products     equipment    panel mountage 19-inch rack system ELK/ELR
    Panel mountage 19-inch rack system ELK/ELR
      The system consists of two different basic versions:
Panel mountage series ELK and 19-inch rack series ELR.
ELK-/ELR-racks are available with or without power supply.
      In standard version there are 3 different sizes with:
either up to 3 plug ports for SE or SERS drives and integrated power supply
or up to 5 plug ports for SE or SERS drives and rack without power supply
3HE-½ 19 Zoll 3HE-¾ 19 Zoll 3HE 19 Zoll
with power supply with power supply with power supply
and 1 plug port and 2 plug ports and 3 plug ports
      Power supply versions are available as follows:
350 VA or 500 VA
Output voltages: 24 VDC, 36 VDC, 60 VDC, 85 VDC and 120 VDC
      All power supplies include an additional second 24VDC output voltage (max 2A).
For each plug port there is a seperate addtional plug port for ventilator boards.
The ventilator boards can be ordered together with the rack or any time later and
easily plugged into the ELK/ELR-rack. (from aprox. 6A adjusted phase current a
ventilation of the power amplifers is necessary).
      ELK-systems are also available for small SE-units
(e.g. SE 400.04.60 V33, SE P05.02.24 V2, SE 400.01.85 V31 or SE P05.03.60 V2).
The racks then are possible with power supply and max. 6 SE drives
or without power supply and max. 8 SE drives.
      19 inch rack-system ELK/ELR – data sheet (855 KByte)
        stepping motor controls catalogue 2015 – catalogue (1854 KByte)
      stepper motors  I   position controls  I   power amplifiers  I  equipment   I  home  I  info@stoegra.de